What is an RCD and why does it need to be tested?

An RCD, or Residual Current Device, is a safety switch designed to quickly cut the electricity supply and prevent electric shock. RCDs can be fixed or portable and should be used in all workplaces for safety reasons. They need regular testing because they can be affected by moisture, dust and poor wiring conditions, which may prevent them from tripping correctly when needed. Test and Tag Sydney Wide conducts RCD inspections across Sydney to confirm devices are in good working order and compliant with NSW safety requirements.

What does an RCD test involve in Sydney?

An RCD test carried out by Test and Tag Sydney Wide measures the exact time the RCD takes to trip using a specific testing device. The result is recorded as a pass or fail. If a device does not pass, the technician advises on the best next steps. Full documentation is provided after every test and a copy is retained in the Test and Tag Sydney Wide system as a backup.

What does a 3-phase test involve and who needs it?

A 3-phase device test involves a physical inspection followed by the use of specialised equipment to measure various electrical parameters. The item is tagged as pass or fail and a detailed report is issued. 3-phase appliances use a higher than standard voltage and draw a higher current, raising the risk of electrical incidents in workshops, factories and commercial facilities. Testing is essential to check for damage and defects. Test and Tag Sydney Wide services businesses including construction sites, factories, warehouses, hospitality venues and healthcare facilities across Sydney.

Who provides RCD and 3-phase testing in Sydney?

Test and Tag Sydney Wide provides RCD and 3-phase testing services to businesses across all Sydney city and metropolitan areas. Their technicians use specialist testing equipment, deliver detailed written reports and follow up when devices are due for retesting. The callout fee starts at $150 + GST, with no travel fee for businesses within 25 kilometres of the Sydney CBD. Test and Tag Sydney Wide can be reached on 0491 726 810.

RCD and 3-Phase Testing

Is your team safe at work?

Faulty RCD and 3-phase devices can lead to electrical incidents and fires at your workplace.

At Test and Tag Sydney Wide, we conduct inspections to confirm these items are in good working order and ensure compliance with safety regulations. Contact us to book a visit today.

Call now 0491 726 810

What is RCD?

Residual Current Devices (RCDs) are designed to quickly cut an electricity supply and prevent an electric shock. Sometimes called safety switches, these can be fixed or portable and should be used at your workplace for safety reasons.

What is a 3-phase appliance?

3-phase appliances use a higher than standard voltage and draw a higher current, which can raise the risk of an electrical incident in your workshop, factory or other commercial facility. Testing is essential to check for damage and defects.

RCD & 3-phase testing: who we help

The Sydney Test & Tag team offers testing services for any business that uses electrical appliances. This includes mobile operators, hospitality venues, construction sites, factories and warehouses, offices, healthcare facilities and more.

We don’t charge a travel fee for clients located within 25 kilometres of the Sydney CBD.

Tick the box for workplace safety compliance

Test and Tag Sydney Wide will visit your premises to ensure your RCDs and 3-phase devices comply with the NSW requirements. Our technicians use specialist equipment, share reports with you and keep a copy in our system as a backup.

What are the signs that a Residual Current Device needs testing?

Signs that an RCD needs testing include constant ‘trips’ where your electricity cuts out. If it takes several tries to reset your RCD or if it trips out again in a matter of minutes, contact Test and Tag Sydney Wide to book an inspection.

What are the signs a 3-phase appliance needs testing?

Buzzing sounds, overheating, snapping or clicking sounds may signal electrical issues or power supply problems and indicate that your device needs to be tested and potentially replaced.

Is RCD and 3-phase testing required by law?

In NSW, electrical equipment must be regularly inspected and tested by a professional who is trained to identify damage and detect electrical faults. Regular testing of RCD and 3-phase devices can help comply with these safety regulations and prevent potential penalties. Contact our team on 0491 726 810 and we can share advice about whether testing is compulsory at your facility.

Why choose Test and Tag Sydney Wide for RCD and 3-phase testing?

Test and Tag Sydney Wide is your experienced RCD and 3-phase testing team. We are recommended because of our:

Quality testing equipment
Fantastic attitude and reliable service
Detailed reports and regular follow-ups
Competitive rate and Sydney-wide service
Rapid response for service callouts

You can rely on our team’s efficient and professional service.

Our test and tag services

RCD & 3-phase testing FAQs

Why is RCD and 3-phase testing important?

RCD and 3-phase testing is crucial to ensure the safety of your premises and to prevent potential hazards such as electrical shocks or fires. Regular testing helps make sure your RCDs and appliances are in good working order.

What does an RCD test involve?

An RCD test involves measuring the exact time your RCD takes to trip. We use a specific testing device and issue a ‘pass or fail’. If your devices do not pass, we’ll let you know the best next steps.

What does a 3-phase test involve?

A 3-phase device test involves a physical inspection and the use of specialised equipment to measure various electrical parameters. Our team will tag the item as ‘pass’ or ‘fail’ and provide a detailed follow-up report after testing is complete.

What happens if an RCD or 3-phase device fails a test?

Our technicians will provide a detailed report outlining the issues and recommend necessary repairs or replacement. It’s important to address these issues promptly to ensure safety and avoid a penalty and prevent an accident at your workplace.

How long does RCD and 3-phase testing take?

The duration of an RCD or 3-phase test can vary depending on the type and condition of the RCD. Our technicians aim to perform thorough and efficient testing.

Do you provide documentation for tested RCDs and 3-phase devices?

We provide detailed reports for all tested RCDs, including the test results, any issues found, and recommendations for repairs or replacements. This will also be stored in our system.

How can I schedule an RCD or 3-phase test?

You can schedule an RCD test by contacting Test and Tag Sydney Wide through our website or giving us a call on 0491 726 810. Our friendly team will arrange a convenient time for our technicians to visit and perform the testing.

Where do you operate?

We operate Sydney-wide. Travel fees apply for distances greater than 25 kilometres from the CBD.

How much does RCD and 3-phase testing cost?

Our call out fee is a $150 Flat Rate. (Excluding GST). Talk to us about testing other items at your premises, or get in touch for a competitive quote for enquiries exceeding 20 items.