Do New and Secondhand Appliances Need to Be Tested and Tagged?

Brand-new, out-of-the-box equipment doesn't need testing before you put it into service unless you have reasonable grounds to believe it is unsafe. Second-hand gear is different, because SafeWork NSW says you should test plug-in equipment before first use if you bought it used. For new and second-hand equipment test and tag in Sydney, one habit covers both: inspect everything on arrival, then get it into a regular testing schedule.

 

New and Second Hand Equipment Testing in Sydney

Key takeaways

  • New, out-of-the-box equipment does not need testing before first use unless you have reasonable grounds to think it is unsafe.
  • Inspect new gear on delivery, then book its first scheduled test.
  • Test second-hand plug-in equipment before first use.
  • Test equipment after a repair or service that could affect its electrical safety, or when you have no record of previous testing.
  • Use a competent person and keep a record of every test.

What SafeWork NSW says about new and second-hand gear

The SafeWork NSW electrical risks fact sheet says brand-new equipment doesn't need testing before it goes into service unless there are reasonable grounds to believe it is electrically unsafe. So you can put a new kettle, monitor, or power board into use once you have checked it over.

That does not mean new equipment never needs testing. Once it is in daily use, it wears like everything else, so it needs a place in your regular testing program.

How to treat new equipment on delivery

Treat delivery day as an inspection day. Faults can come from transport damage or poor storage, even on equipment that has never been switched on. SafeWork NSW also recommends checking leads for damage before use and removing damaged ones from the workplace.

Here is a simple routine for each new item:

  1. Check the cord, plug and casing for cracks, cuts or crushed sections.
  2. Look for bent pins, loose parts or exposed wiring.
  3. Keep anything doubtful out of service and arrange a return or replacement.
  4. Add the item to your equipment register with its purchase date.
  5. Book its first scheduled test.

Steps four and five are where most businesses slip. New gear that never gets registered quietly becomes untracked gear within a year.

When second-hand and repaired gear needs testing first

A second-hand item arrives with no history. You don’t know how it was used, where it was stored or whether anyone ever tested it. SafeWork NSW says plug-in equipment should be tested before first use when:

  • you bought it second-hand
  • it has had a repair or service that could affect its electrical safety
  • there is no record of it being tested previously

This is the point where you need a competent person, not a quick look and a guess. Untrained DIY testing risks missed faults and poor records, which is why we explain testing and tagging of electrical equipment as a job for someone with the right training.

Hire equipment is a related case. SafeWork NSW says it must be inspected and tested at the start of each hire and every three months.

Who can test your equipment?

SafeWork NSW describes a competent person as someone who has gained the knowledge and skills for the task through training, qualification or experience. Examples include a licensed electrician, or someone who has completed a structured training course on using a pass-fail portable appliance tester and visually inspecting equipment.

Every test also needs a record. A valid record of testing must show who did the test, the date, the outcome and when the next test is due. An equipment tag can serve as that record.

Build both into your testing schedule

How often you test depends on where and how you use the equipment. As a general rule, SafeWork NSW says equipment in harsh environments should be inspected and tested at least once every 12 months, with workshops and commercial cleaning equipment tested at least every six months.

Whatever interval you use, give each new item a first test date and record it properly. A good register lists the asset ID, location, test date, result and next due date. Consistent test and tag records let you see at a glance what is due, and you'll be ready if an insurer or SafeWork NSW asks to see them.

Book your test and tag today

Got new gear to schedule, or used equipment that needs testing before it goes to work? Call Test and Tag Sydney Wide on 0491 726 810 or book a test and tag service online.

We test and tag new, second-hand and repaired equipment across Sydney, build your equipment register and remind you when each item is due again.